Sawtooth Rifles #66 .338 Lapua Color Selection

Finished Rifle - Sawtooth Rifles #66 .338 Lapua
Stiller Tac 338 Single Shot
McMillan A5-Adjustable Woodland Spectre
Bartlein 1.35 Rem Varmint Finished at 30" 1:9.3 twist
Piercision 4 Port Slabbed Brake
Jewell Trigger'
PTG Trigger Guard
Nightforce 5.5-22x56 Moar
Nightforce Ultralight Rights
Vortex Low Profile Bubble Level
Magpul Flat Dark Earth Cerakote
Atlas PSR Tall BT47-LW17 Bipod

Blending in, near some southern Idaho sage and dry grass.

Below are pictures of the McMillan A5 Stock in Woodland Specter, after filling the barrel channel to match the smaller profile.  Rifle: Sawtooth Rifles #66 .338 Lapua on a Stiller Tac338 Single Shot.

Shades of tan and brown Cerakote samples.  The Desert Sand (square plate on left) closely matches the tan in the stock.

Colors that combine the green and tans - Field Drab on left, Foliage Green on right (closely matches the foliage color in the stock)

The Cerakote colors that closely match the McMillan Woodland Specter colors.  L-R - Desert Sand, Mil Spec OD Green, Magpul Foliage Green

Sniper Grey (L) and Armor Black (R)

Sawtooth Rifles #55/56/57 Cerakoted in Magpul Flat Dark Earth, with our custom mixed pattern on the stock. An example of our original color plan.  Our plan was to go with a bit less black on the stock shadowing.

 

Sawtooth Rifles #62 with the same stock pattern, and Mil Sped OD Green Cerakote.

McMillan Woodland Spectre mocked up with a Magpul Flat Dark Earth Cerakoted barrel action.

McMillan Woodland Spectre mocked up with a Magpul Foliage Green Cerakoted barreled action.

Magpul Foliage Green Ceracote vs McMillan Woodland Spectre

Cerakote Examples - Sniper Grey

Cerakote - Sniper Grey

Sniper Grey is one of our favorite colors, especially for our custom rifles.  It never looks out of place on a firearm, and goes well with most of the other colors, wood, and camouflage patterns.  We also use Sniper Grey in some of our camouflage patterns.  Sniper Grey and OD Green is probably our favorite combination.

Sawtooth Rifles #2, a .35 Whelen built on a Marlin XL7 with Sniper Grey on the metal.

Sawtooth Rifles build #3 and #4, on Safari in South Africa as an extreme test of the Cerakote finishes.  The metal on these two were finished with Sniper Grey.  The stock on #3 (top) was finished with Flat Dark Earth and Sniper Grey splatters.  The Stock on #4 (bottom) was finished with Coyote Tan with Sniper Grey and OD Green splatters.

A Browning A-bolt Composite Stalker finished with Sniper Grey on the metal and with Sniper Grey in the Camouflage pattern on the polymer stock.

A close up of the finish on Sawtooth Rifles #8.  Sniper Grey was used on the metal.  The OD Green stock was finished by "Karnis" with Duracoat for this special project for a Veteran.

Sawtooth Rifles #9 with Sniper Grey on the metal and as the base coat on the stock (which shows up as the lines in the camouflage pattern)

Evan Hill, of Hill People Gear's, custom Mauser scout rifle with Sniper Grey on the metal and Magpul Flat Dark Earth on the stock, with Magpul OD Green splatters.

A Remington 700 ML with Sniper Grey on the metal and OD Green on the polymer stock.

A Kimber Ultra Compact 1911 with Sniper Grey on the rail, small parts, and grips, and Armor Black on the frame.

A close up of the Sniper Grey finish on Sawtooth Rifles #12.  Sniper Grey makes for a nice companion finish to a laminated stock.

A Remington 760 finished in Sniper Grey with the wood refinished with a matte Tung oil finish.

A Browning BBR with the typical "Browning Shine" replaced by Sniper Grey on the metal and a matte Tung oil finish on the walnut stock.  The Leupold scope was also Cerakoted with the Sniper Grey C-series product.

A custom target rifle (HS Precision built by Gre-Tan) we finished in Sniper Grey.

Glock 19 with Sniper Grey on the slide, and Magpul OD Green on the polymer frame.